Dindas Fibre Cement

Compressed Fibre Cement Structural Flooring

Jump to

Dindas Fibre Cement Flooring

Engineered to perform in tough Australian conditions!

Dindas Fibre Cement is engineered to provide durability, acoustic benefits, and strong performance underfoot (meets AS/NZS 2908.2:2000). It’s trusted choice for subfloor applications, delivering strength, stability, and reliability in demanding Australian conditions.

Moisture & Rot Resistant

Suitable for wet areas with appropriate moisture-barrier detailing and drainage, making it well suited to internal and external subfloor applications.
It is resistant to swelling, warping, or degradation when properly installed.

Fire Performance

Offers fire-resistant properties, adding an extra safety layer to your projects.
Non-combustible under AS 1530.1, suitable for BAL (Bushfire Attack Level) zones.

Robust Performance

Reinforced compressed fibre cement construction supports strength and impact resistance for structural flooring applications.
Pre-sealed edges support product identification and edge protection.

Lightweight & Cost-Efficient

Its lightweight composition reduces installation costs and time, making it a practical choice for subfloor projects.
Easy to cut and drill with fibre cement saw blades and drill bits.

Termite Protection and Acoustic Performance

Unlike timber-based products, Dindas Fibre Cement is not susceptible to termite damage and fungi, when properly installed.
It reduces sound transmission between floors, improving building acoustics.

Dindas Fibre Cement Product Specifications

Applications

Internal and External Subfloor Sheeting.

Dindas Fibre Cement is specifically manufactured for load-bearing capacity and uniformity.

Thickness

19mm or 22mm

Length Options

1800, 2400, 2700mm

Width Options

600mm

Average Weight

19mm: 24kg/m2 and 22mm: 28kg/m2

Fire Rating Certification

BAL (Bushfire Attack Level) zones.

Sounds Insulation

Rw 34 rating

Manufacture / Design

AS/NZS 2908.2:2000 Series of Standards

Advantages

Designed to withstand typical residential and light commercial loads, high foot traffic, and challenging weather conditions when designed and installed in accordance with applicable standards.
Can help reduce floor-to-floor noise when installed as part of the relevant tested floor system.
It features Moisture Resistance capabilities, and it is suitable for wet areas with proper waterproofing and drainage, making it a trusted choice for subfloors.
It has lower maintenance than many untreated timber subfloor systems, and is built for durable use under normal service conditions.
It is built for tough conditions and engineered to withstand the challenges of the Australian climate, ensuring year-round performance.
It is Lightweight and Easy to install, reducing labour effort and simplifying subfloor construction, saving time and resources.
Fire-resistant and Safe with added safety through certified fire-resistant properties.
Termite protection capabilities: As a fibre cement product, it is not susceptible to termite damage when properly installed.
It is manufactured using standard industry components to AS/NZS 2908.2:2000 standards. As with all fibre cement products, appropriate safety controls should be used during cutting and installation.
Fibre cement itself does not corrode; however, fasteners and supporting metalwork must use corrosion-resistant materials as specified in the product guide.
Pre-Sealed Edges for Additional Protection:
- 19mm Structural Flooring sheets are sealed on all edges with Orange coloured sealant.
- 22mm Structural Flooring sheets are sealed on all edges with Magenta coloured sealant.

Dindas Fibre Cement Product Sheet Specifications

Length (mm)	Width (mm)	Thickness (mm)	Max. Supports (mm)	Mass/sheet (kg)	Mass/m2 (kg/m2)	Edge Colour
1800	600	22	600	30.2	28	Magenta
2400	600	22	600	40.3	28	Magenta
2700	600	19	450	38.9	24	Orange
2700	600*	22	600	45.4	28	Magenta

*2700x600x22mm size option subject to availability at the time of order.

Dindas Fibre Cement Applications

Dindas Fibre Cement is versatile and can be used in both internal and external Structural Flooring applications, including:

Internal Applications:

- Structural Flooring for residential and commercial buildings
- Wet areas with proper waterproofing and drainage (bathrooms, laundries, kitchens)
- Lightweight Structural Flooring solution for multi-story constructions
- Underlay for tiles, vinyl, or carpet

External Applications:

- Balconies, verandahs, and decks
- Outdoor entertainment areas
- Non-combustible Structural Flooring in bushfire-prone areas (BAL-rated zones)
- Structural Flooring for modular or transportable buildings

Note:
If using vinyl floor covering, the sheets can be installed with the mesh side up to achieve a square-edge joint. (Please refer to the Product Installation Guide for additional information).